Wagner SprayTech 558052 User Manual

ProSpray 3.29 • 3.31

11

 

Starting operation

VOLUME PUMPED

SELECT-4

MENU-1

The Volume Pumped screen shows the

total number of gallons or liters sprayed by 

the sprayer.

GALLONS      X

MENU-1

LITRES          X

MENU-1

LITRES-2

GALLONS-2

To select the Volume Pumped screen, press

the #4 key.

JOB VOLUME

SELECT-4

MENU-1

The Job Volume screen allows the user

to reset a liter counter to track usage on 

specific jobs.

GALLONS

XXXX

RESET-3

MENU-1

To select the Job Volume screen, press the

#4 key.

UNIT SERIAL #

SELECT-4

MENU-1

The Unit Serial # screen shows the sprayers

serial number.

SER # XXXXXXXXXX

MENU-1

To select the Unit Serial # screen, press the

#4 key.

TIMERS

SELECT-4

MENU-1

The Timers screen shows the total time the 

sprayer has been turned on as well as the 

total time the sprayer has been running (pumping).

ON TIME
RUN TIME

XXXX
XXXX

To select the Timers screen, press the #4 

key.

JOB TIMERS

SELECT-4

MENU-1

The Job Timers screen allows the user to 

reset the “ON TIME” and “RUN TIME” to

track time on specific jobs.

JOB ON

X

RESET-3

MENU-1

JOB RUN

X

RESET-3

MENU-1

To select the Job Timers screen, press the 

#4 key. “JOB ON” screen will appear. Press

#3 to reset. Press #1 to continue to “JOB

RUN” screen. Press #3 to reset. Press #1

to scroll through the remaining menu 

screens.  

SERVICE TIME

SELECT-4

MENU-1

The Service Time screen allows the user to 

set a service time interval (in hours).  Below 

the set time, the screens shows the current amount of hours on the 

sprayer since the last activation of the service timer.  To select the 

Service Timer screen, press the #4 key.

SERVICE @    XX

RUN HOURS    XX

To set the service time, press the #2 (up) 

and/or the #3 (down) keys to the desired 

time (run hours will increase/decrease in increments of 25 for each 

time you press a key).  
When the service time interval is set and met by the run hours, the 

display will show a “Service Required” screen. The pump will remain

functional.  To return to the Main Screen, press the #1 key.  Doing so 

will reset the “Service @” and “Run Hours” displayed on the Service

Screen back to 0.

SECURITY CODE

CHANGE-2

MENU-1

The Security Code screen allows the user 

to set a four digit security code to prevent 

unauthorized use of the sprayer. If a security code has been set, the

control system display will ask for the code at startup.  If the correct 

code is entered, the display will show the Main Screen and the 

sprayer will operate.  If the wrong code is entered, the display will 

continue to ask for the correct code and the sprayer will be disabled.  

To set or change the security code, press the #2 key.

ENTER OLD CODE

NUMBER

Enter the old security code number to 

access the screen that allows the code 

change.  If the wrong code is entered, the display will continue to ask 

for the correct code and the security code cannot be changed.

ENTER NEW CODE

NUMBER

XXXX

RE-ENTER NEW

NUMBER

XXXX

NEW CODE NUMBER

ACCEPTED

Enter the new security code.  Once the 

new code is entered, the display will 

automatically ask that the new code be 

re-entered for verification.  If the same new 

code is re-entered, the display will confirm 

that the new code has been accepted and 

return to the Main Screen.  If the new code 

is re-entered incorrectly, the display will return to the “Enter New

Code Number” screen and the process will repeat.
If you forget or misplace your security code, you can contact Wagner 

customer service for assistance.

PRIME

The Prime screen appears when the 

pressure control knob is set at the “MIN”

setting.

RAPID CLEAN

The Rapid Clean screen appears when the 

pressure control knob is set at the RAPID 

CLEAN position and the PRIME/SPRAY valve is in the PRIME position.