Wagner SprayTech 9175 User Manual

English

 

6 

 

below.    
  1.  Twist the knobs on 

either side of the handle 

counterclockwise to 

unlock the handle.  Pull 

the handle out fully, and 

turn knobs clockwise to 

lock into place. 

  3.  Attach the pail bracket.  Line up the holes in the bracket 

with the holes in the sprayer.  Insert and tighten the 

screws using a 3/16” allen wrench.

  2.  Insert the ends of the hose bracket into the holes of the 

handle as shown. 

  4.  Thread one end of the high pressure spray hose to 

the spray hose port.  Hold the port with an adjustable 

wrench, and tighten the hose with the other.   

  5.  Thread the other end of the hose to the spray gun.  Hold 

the gun with one adjustable wrench, and tighten the 

hose nut with the other. 

  6.  Thread the suction tube onto the 

inlet valve and tighten firmly by 

hand.  Be sure that the threads 

are straight so that the fitting 

turns freely.

  7.  Press the return tube onto 

the return tube fitting.  

Squeeze clip over the return 

tube fitting to secure the 

return tube.  

  8.  Verify that the seal is 

present inside the suction 

tube.  Thread the inlet filter 

into the end of the suction 

tube.