Wagner SprayTech 110v User Manual

 

1.  Ensure that the sealing surfaces of the connections are 

clean.

 

Ensure that the red inlet (1) is inserted in the coating ma-

terial inlet (4).

2.  Use the enclosed 41 mm wrench to screw the union nut 

(2) at the suction hose (3) onto the coating material inlet 

(4) and tighten it.

3.  Screw the union nut (5) at the return hose (6) to the con-

nection (7) (22mm).

1.  Screw the high pressure hose (9) onto the hose connec-

tion

2.  Screw the spray gun (10) onto the high pressure hose

3.  Tighten all union nuts on high pressure hose so that no 

coating material can escape.

4.  Screw the tip holder with the selected tip onto the spray 

gun, align tip and tighten union nut.

When unscrewing the high pressure hose, 

hold firmly on the hose connection with a 

22mm wrench.

1.  Ensure that the sealing surfaces of the connections are 

clean. Ensure that the red inlet (1) is inserted in the coat-

ing material inlet (4).

2.  Screw the union nut (5) on the return pipe (6) onto the 

connection (7).

3.  Screw the upper hopper (8) onto the coating material in-

let (4).

4.  Fix TopClean on hopper upside

5.  Plug in return pipe into TopClean and screw on union nut

STARTUP

Connection must always be carried out via 

an appropriately grounded safety outlet with 

residual-current-operated circuit-breaker.

Before connecting the unit to the mains supply, ensure that 

the line voltage matches that specified on the unit’s rating 

plate.

1

1

4

4

2

3

5

6

7

5

6

7

8

9

9

10