Cisco Aironet 1500 Series Streetlight Power Tap AIR-PWR-ST-LT-TAP= User Manual
Product codes
AIR-PWR-ST-LT-TAP=
Ordering Guide
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 6
Table 1.
Cisco Aironet 1500 Series Lightweight Outdoor Mesh Access Point Part Numbers
Part Number
Product Name
AIR-LAP1510AG-A-K9
Cisco Aironet 1510AG Lightweight Outdoor Mesh Access Point, FCC configuration
AIR-LAP1510AG-C-K9
Cisco Aironet 1510AG Lightweight Outdoor Mesh Access Point, China configuration
AIR-LAP1510AG-K-K9
Cisco Aironet 1510AG Lightweight Outdoor Mesh Access Point, Korea configuration
AIR-LAP1510AG-N-K9
Cisco Aironet 1510AG Lightweight Outdoor Mesh Access Point, non-FCC configuration
AIR-LAP1510AG-P-K9
Cisco Aironet 1510AG Lightweight Outdoor Mesh Access Point, TELEC configuration
AIR-LAP1510AG-S-K9
Cisco Aironet 1510AG Lightweight Outdoor Mesh Access Point, Singapore configuration
Note:
The ETSI configuration for the Cisco Aironet 1510 Lightweight Outdoor Mesh Access
Point, AIR-LAP1510AG-E-K9 is not orderable anymore. The replacement product is the Cisco
Aironet 1522 Lightweight Outdoor Mesh Access Point, AIR-LAP1522AG-E-K9. For more
information on this product visit
.
The Cisco Aironet 1500 Series is certified for use only in certain countries. The part number
distinguishes the regulatory domain for which it is designed. Customers are responsible for
verifying approval for use in their country. To verify approval and to identify the regulatory domain
that corresponds to a particular country, please visit:
http://www.cisco.com/go/aironet/compliance
.
Note that the part number does not distinguish between a rooftop or pole-top access point. The
same device is used for either instance, with the role being configured in software.
Cisco Aironet 1500 Series Lightweight Outdoor Mesh Access Points ship with the following:
●
Universal mounting plate
●
Quick Start Guide
The universal mounting plate allows users to install the access point on a flat surface, such as a
wall. It is also used in conjunction with the Cisco Aironet 1500 Series Pole-Mount Kit (listed next) to
mount the access point to a pole.
Customers must provide the appropriate screws, bolts, and anchors for the material into which
they will mount the access point. See the hardware installation guide for details.
Pole-Mount Kit
The pole-mount kit is used to mount the access point to a pole. It is used along with the universal
mounting plate, which ships with the access point. Table 2 shows the part number for the pole-
mount kit.
Table 2.
Cisco Aironet 1500 Series Pole-Mount Kit Part Number
Part Number
Product Name
AIR-ACCPMK1500 =
Cisco Aironet 1500 Series Pole-Mount Kit
The pole-mount kit supports poles up to 3.35 inches in diameter. It enables users to install the
access points horizontally to the ground, even when the pole is sloped or angled.