Makita GA5041C User Manual

P 11/ 14

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -5. Switch Block

[3] -6. Switch

DISASSEMBLING

After removing Switch lever (Refer to Fig. 11), separate Switch block from Motor housing as drawn in Fig. 13.

After removing Switch lever (Refer to Fig. 11), remove Switch from Switch block as drawn in Fig. 14.

Fig. 13

Insert Slotted screwdriver into the gap between Switch

block and Motor housing, remove Switch block from

Motor housing by twisting the screwdriver.

Fig. 14

Fig. 15

Switch block

Controller

DISASSEMBLING

[3] -7. Brush Holder

DISASSEMBLING

Insert Slotted screwdriver into the gap between Switch and Switch block.

While fitting the tip of the screwdriver to the side groove of Switch,

remove Switch by prying it off.

Remove 3x10 Tapping screw. Then, insert Slotted screwdrivers into the gap between Motor housing

and Brush holder’s plastic portion. And then, disassemble Brush holder by prying them off.

Brush holders can be disassembled as drawn in Fig. 15.

Brush holder

Slotted screwdriver

Switch

Slotted screwdrivers

Slotted screwdriver