Zenoah EXZ2401S User Manual

Make sure every cutter has the same length and edge
angles as illustrated. (MA8) 

■ GEAR CASE 
The reduction gears are lubricated by multipurpose,
lithium-based grease in the gearcase. 
Supply new grease every 25 hours of use or more
often depending on the job condition.
When adding lubricant, use a grease gun to insert
lubricant into the three grease nipples located on the
gear case. (MA9)

■ GEAR CASE
• The reduction gears are lubricated by multipurpose,

lithium-based grease in the gear case. At every 20
hours of use, supply the gear case with new grease.

• Remove the cutter holders before installing new

grease to arrange for old grease to exit.

• When removing and installing the cutter holder(a),

use care not to allow any dirt and dust entering in to
the gear case.