Polycom 2000 User Manual

During the connection process to the other endpoints, the system displays 

on the calling participant’s screen the called number and the connection 

status. 
A Maximum of 32 characters can be displayed for connection indications. 

If the displayed information is longer than 32 characters the text is 

truncated.
If the system dials out to only one destination endpoint, the dialed 

number is not shown, only the connection status. 
If the destination endpoint is ISDN, the system displays the connection 

progress in percentages, where the percentages represent various stages 

in the connection process as follows:
•

Up to 60% the connection of the ISDN channels (up to 30 channels 

can be connected when E1 is used for the connection).

•

60% - 80% BONDING stage 

•

80% - 90% Capability exchange stage

•

90% - 99% Media connection stage

Once the call is completed, the indications are cleared.
If the call is not completed after trying all possible protocols, the system 

displays the number that was dialed on the calling endpoint’s screen and 

one of the following causes: 
•

Busy - the far endpoint is in another call. In such a case, the system 

does not try to connect using another communication protocol.

•

Rejected - the far endpoint has rejected the call. In such a case, the 

system will try to connect using another communication protocol. 

•

Unreached - the number could not be resolved by the gatekeeper or 

the SIP proxy or could not be found on the network. In such a case, 

the system will try to connect using another communication protocol.

•

Failed - any reason causing the system not to complete the connection 

process. In such a case, the system will try to connect using another 

communication protocol.

You can hide the connection indications by changing the system 

configuration. For more details, see "Displaying the Connection Information - 

System Configuration” on page

.