Polycom 2000 User Manual

The following features and capabilities are supported in gateway calls:
•

Gateway Sessions are in CP mode only. 

If High Definition Video Switching is selected in the Profile assigned 

to the Gateway Session, the system ignores this setting and will run the 

Gateway Session in CP mode.

•

H.239 Content 

•

FECC (IP participants)

•

Recording. The Recording Link is not considered as a participant and 

therefore, the gateway session will automatically end when only one 

of the participants remains connected in addition to the recording 

link. The video of the Recording Link is not included in the display of 

the video of the gateway call.

•

Forwarding of DTMF codes from the Gateway Session to a conference 

running on another gateway, MCU or DMA. This enables the 

participant to enter the required conference and/or chairperson 

password when connecting to another conference.

DTMF forwarding is enabled when there are only two participants 

connected to the Gateway Session. 

•

Up to 80 gateway calls (same as conferences) may be run on a fully 

configured RMX 2000.

•

Gateway Profiles are included in the Backup and Restore Configuration 

operations.

•

CDR files are generated for Gateway Sessions in the same way as for 

conferences.

•

Cascading. To support cascading, the gateway indicates a lower 

number than the MCU for master-slave relation (directly or through 

DMA).

•

Gateway calls are supported in Microsoft and Avaya environments.