Panasonic WV-NP472 User Manual

-26-

3. Click the Setup Menu button. The User Setup win-

dow appears.

• Enter “admin” in the user name column.
• Click the OK button.

■

Connection type 1

IP address

Enter “192.168.0.XXX” for the IP address (where XXX should

be a number from 2 to 254 except the same IP addresses

already assigned to the PC and any other cameras).

Subnet mask

Use the default setting “255.255.255.0” for the subnet mask.

Default gateway

No setting required

Network speed

Set the network speed.

Use the default setting “auto” for the network speed.

Selectable parameters: auto (default setting), 100 Mbps (full

duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10

Mbps (half duplex) 

HTTP port

Use the default setting “80” for the HTTP port.

Host name

No setting required

DNS

Set to OFF.

Primary server

No setting required

Secondary server

DHCP

Set to OFF.

4. Click the Network button on top of the screen. The

Network Setup window appears.

5. Set parameters for each item in the Network Setup

menu.
The parameters differ depending on the connec-
tion type.