Yamaha RX-Z11 User Manual
Remote control features
124
En
You can set the backlight mode of the remote control.
1
Press G
SETUP on the remote control using a
ballpoint pen or similar object.
“SETUP” appears in the display window (4) on the remote
control.
“SETUP” appears in the display window (4) on the remote
control.
2
Press 9k / n repeatedly to select “LIGHT” and then
press 9
press 9
ENTER.
“LIGHT” and the current “LIGHT” setting appears in the
display window (4) alternately.
display window (4) alternately.
3
Press 9k / n to select the desired setting.
4
Press G
SETUP again to exit from the setup mode.
y
You can light up the backlight by pressing 6LIGHT anytime.
You can light up the backlight by pressing 6LIGHT anytime.
You can control other components by setting the appropriate remote
control codes. Codes can be set up for each control area. For a
complete list of available remote control codes, refer to “List of
remote control codes” at the end of this manual.
control codes. Codes can be set up for each control area. For a
complete list of available remote control codes, refer to “List of
remote control codes” at the end of this manual.
The following table shows the default component (Library:
component category) and the remote control code for each control
area.
component category) and the remote control code for each control
area.
Remote control code default settings
You may not be able to operate your Yamaha component even if a Yamaha
remote control code is preset as listed above.
In this case, try setting another Yamaha remote control code.
remote control code is preset as listed above.
In this case, try setting another Yamaha remote control code.
1
Press G
SETUP on the remote control using a
ballpoint pen or similar object.
The remote control enters the setup menu. “SETUP” appears in
the display window (4) on the remote control.
The remote control enters the setup menu. “SETUP” appears in
the display window (4) on the remote control.
2
Press 9k / n repeatedly to select “P-SET” and then
press 9
press 9
ENTER.
The remote control enters the preset mode. “P-SET” and name
of the currently selected control area appears in the display
window (4) alternately.
of the currently selected control area appears in the display
window (4) alternately.
Setting the backlight mode of the remote
control (LIGHT)
control (LIGHT)
Choice
Descriptions
ON
Lights up the backlight when a button is pressed
or the remote control detects a motion.
or the remote control detects a motion.
OFF
Lights up the backlight only when 6LIGHT is
pressed.
pressed.
Setting remote control codes (P-SET)
LIGHT
ON
Current “LIGHT” setting
Control area
Library
(component
category)
Manufacturer
Default
code
MULTI
DVD
Yamaha
04306
V-AUX
—
—
—
PHONO
—
—
—
MD TAPE
MD
Yamaha
00409
BD
HD DVD
DVD
Yamaha
04306
DVD
DVD
Yamaha
04306
CD
CD
Yamaha
01105
CD-R
CD-R
Yamaha
01405
CBL
SAT
—
—
—
DTV
—
—
—
DVR
DVR
Yamaha
00707
VCR
—
—
—
TUNER
SOURCE
Yamaha
00012
DOCK
SOURCE
Yamaha
00012
NET
USB
USB
SOURCE
Yamaha
00012
XM
(U.S.A. and
Canada models)
SOURCE
Yamaha
00012
(TAPE)
(Australia model)
TAPE
Yamaha
00311
TV
—
—
—
Note
SETUP
P-SET