Yamaha RX-Z11 User Manual

Press G

SETUP again to exit from the setup mode.

■ Clearing a learned function (ERASE)

Press G

SETUP using a ballpoint pen or similar 

object.
“SETUP” appears in the display window (4).

Press 9k / n repeatedly to select “ERASE” and then 
press 9

ENTER.

The remote control enters the learning mode. “ERASE” and 
the name of the currently selected control area appears in the 
display window (4) alternately.

Set the operation mode selector to F

SOURCE and 

then press an input selector button (3).
“ERASE” and the name of the selected control area appears in 
the display window (4) alternately.

y
• You can also select the desired control area by pressing 5SELECT 

l / h repeatedly.

• If you want to erase the function learned in the AMP or TV control 

area, set the operation mode selector to FAMP or FTV.

Press 9

ENTER.

“E-KEY” appears in the display window (4).

Press and hold the button you want to clear for about 
3 seconds.
If clearing is successful, “ERASE” and “OK” appears in the 
display window (4).

y
• If you continuously want to clear another function, repeat step 3.
• Once you clear a learned function, the button reverts to the factory 

setting (or to the manufacturer setting if you have set remote control 
codes).

Press G

SETUP again to exit from the setup mode.

• “NG” appears in the display window (4) on the remote control if clearing 

was unsuccessful.

• “ERROR” appears in the display window (4) if you press more than one 

button simultaneously.

SETUP

ERASE

DVD

E-KEY

ERASE

OK