Yamaha RX-Z11 User Manual

Example
Set the input source to DVD → Turn on the DVD player → 
Turn on the video monitor

Step 1 (“MCR1”): Press DVD.
Step 2 (“MCR2”): Press AV POWER.
Step 3 (“MCR3”): Press TV POWER.

•

To change the selected input area, press 5SELECT l

 / h

. Pressing the input 

selector buttons will program a macro step, whereas 5SELECT l

 / h

 only 

changes the selected input area.

• The position of the operation mode selector (AMP/TV/SOURCE) 

affects the assigned function. When the operation mode selector is set 
to FAMP or FTV, the input source selectors do not function.

Press H

MACRO to confirm the program.

You can set up to 10 steps (10 functions). After you have set 10 
steps, “FULL” appears and the remote control automatically 
exits from the macro programming mode. 

Press G

SETUP again to exit from the setup mode.

“ERROR” appears in the display window (B) if you press more than one 
button simultaneously.

You can clear all changes made in each function set, such as learned 
functions, macros, renamed control area names and setup remote 
control ID.

■ Clearing function sets (CLEAR)

Press G

SETUP on the remote control using a 

ballpoint pen or similar object.
“SETUP” appears in the display window (4).

Press 9k / n repeatedly to select “CLEAR” and then 
press 9

ENTER.

The remote control enters the clear mode. “CLEAR” and 
“L:the three-letter name of the selected control area” (for 
example, “L:DVD”) appears in the display window (4) 
alternately.

Press 9k / n repeatedly to select the desired clear 
mode.

Press and hold 9

ENTER for about 3 seconds.

When the clearing is successful, “OK” appears in the display 
window (4).

• “NG” appears in the display window (4) if clearing was unsuccessful.
• “ERROR” appears in the display window (4) if you press a button not 

indicated in the respective step, or if you press more than one button 
simultaneously.

MCR 1

M:DVD

DVD

L:DVD (etc.)

(L:Three-digit name of the selected control area) Clears all 
learned functions the respective control area. You can 
change the control area to be cleared by pressing the desired 
input selector button (3) or 5SELECT l / h repeatedly.

L:AMP

Sets all learned functions for controlling the amplifier 
functions to the initial factory settings. Set the operation 
mode selector to FAMP to select this clear mode.

L:TV

Clears all learned functions for TV control area. Set the 
operation mode selector to FTV to select this clear mode.

L:ALL

Clears all learned functions.

M:DVD (etc.)

(M:Name of the selected macro button) Clears the macro 
programmed for the selected macro button (see page 129). 
The assigned macro to the selected macro button reverts to 
the initial factory macro. Press the desired macro button if 
you want to change the macro button you want to clear the 
programmed functions of.

M:ALL

Clears all programmed macros. The assigned macro to the 
selected macro button reverts to the initial factory macro.

RNAME

Set all the name of the control areas to the default settings.

FCTRY

Set all settings of the remote control to the initial factory 
settings.

SETUP

CLEAR

L:DVD