EdgeStar TWR80ES User Manual
2. Parts and Features
6. FOOT
2. LI GHT SWITCH
1. TEMPERATURE CONTROL KNOB
3. LI GHT
5. SHELF
4. FAN MASK
7
6
5
4
3
2
1
8. REAM COVER
9. MAGNETI C SEAL
11. DOOR FRAME
10. GLASS
7. WATER BOX
9
10
11
8
Please replace the text
for number 8 with
“Hinge cover”
for number 8 with
“Hinge cover”
Note: The above diagram is for reference only- your specific model of wine
cooler will likely differ slightly from the diagram above (in light placement,
bottle capacity, etc,) but its operation will be essentially the same.
1. Temperature control knob (only found on models with manual temperature
control).
2. Light switch - push the switch to turn the light on or off.
3. Light- the light is an energy-saving LED.
4. Fan mask- this protects the fan from accidental damage.
5. Shelf- The shelves easily slide in and out.
6. Foot- these leveling legs screw in and out to help level your cooler on
slightly unlevel surfaces.
7. Water box- this is located outside the cooler, in the back. It catches water
condensed from inside your cooler and holds it for evaporation.
8. Hinge cover- this covers and protects your door hinge. Remove it to access
the hinge (if you want to reverse the door swing, for example [on models with
reversible doors only]).
9. Magnetic seal- this gasket ensures a solid, airtight seal between the door
and the cabinet.
10. Glass- the tempered glass protects your wine while displaying it.
11. Door frame- open and close your cooler by the door frame or the handle
(if included on your model).
cooler will likely differ slightly from the diagram above (in light placement,
bottle capacity, etc,) but its operation will be essentially the same.
1. Temperature control knob (only found on models with manual temperature
control).
2. Light switch - push the switch to turn the light on or off.
3. Light- the light is an energy-saving LED.
4. Fan mask- this protects the fan from accidental damage.
5. Shelf- The shelves easily slide in and out.
6. Foot- these leveling legs screw in and out to help level your cooler on
slightly unlevel surfaces.
7. Water box- this is located outside the cooler, in the back. It catches water
condensed from inside your cooler and holds it for evaporation.
8. Hinge cover- this covers and protects your door hinge. Remove it to access
the hinge (if you want to reverse the door swing, for example [on models with
reversible doors only]).
9. Magnetic seal- this gasket ensures a solid, airtight seal between the door
and the cabinet.
10. Glass- the tempered glass protects your wine while displaying it.
11. Door frame- open and close your cooler by the door frame or the handle
(if included on your model).
4