EdgeStar TWR80ES User Manual
3. Installation
1.
Remove all interior and exterior packaging.
2.
Set up your wine cooler on a level surface. Make sure you have at
least 2” clearance on both sides and 4” clearance in the back for
ventilation.
least 2” clearance on both sides and 4” clearance in the back for
ventilation.
3.
Clean the interior surface with a little bit of lukewarm water and a
soft cloth.
soft cloth.
4.
If you desire, install the handle as outlined below (if your cooler
comes with a handle.)
comes with a handle.)
5.
Insert the power cord into the power socket. Make sure the power
socket is a grounded 115V~AC / 60Hz socket.
socket is a grounded 115V~AC / 60Hz socket.
6.
Fill the wine cooler with your choice of wine bottles. Allow up to 24
hours of operation for the bottles to reach the desired temperature.
hours of operation for the bottles to reach the desired temperature.
4. Operation
The Temperature Control
Your wine cooler uses one of two systems for adjusting the thermostat:
Digital control-
Adjust the temperature using the up and down arrows located on the door of
the wine cooler. While you are using the arrows, the temperature you are
setting appears on the digital display. After you finish setting the temperature,
the digital display will change to show the current temperature within the
cooler.
Manual control-
Use the temperature adjustment knob located inside the wine cooler to
change the temperature. Turn the knob to your desired temperature setting.
Interior Light
Your wine cooler has an interior light with an on/off switch. Turn the light on or
off by pressing the switch. Note: on some models the temperature control
switch is located inside the wine cooler. On others, the light switch is a button
on the door.
Leveling Legs
Your wine cooler is shipped with leveling legs installed. To adjust these
leveling legs, carefully lean the cooler to one side (make sure the cooler is
empty and the door is secured) and unscrew the leveling legs to make them
longer. Screw them in tighter to make them shorter.
Note: This cooler is not designed to operate with the leveling legs removed.
Bottle Capacity
Bottle capacity listed for your wine cooler is an estimated maximum capacity
based on standard 750 mL wine bottles. For any other size bottles, capacity
will vary.
Your wine cooler uses one of two systems for adjusting the thermostat:
Digital control-
Adjust the temperature using the up and down arrows located on the door of
the wine cooler. While you are using the arrows, the temperature you are
setting appears on the digital display. After you finish setting the temperature,
the digital display will change to show the current temperature within the
cooler.
Manual control-
Use the temperature adjustment knob located inside the wine cooler to
change the temperature. Turn the knob to your desired temperature setting.
Interior Light
Your wine cooler has an interior light with an on/off switch. Turn the light on or
off by pressing the switch. Note: on some models the temperature control
switch is located inside the wine cooler. On others, the light switch is a button
on the door.
Leveling Legs
Your wine cooler is shipped with leveling legs installed. To adjust these
leveling legs, carefully lean the cooler to one side (make sure the cooler is
empty and the door is secured) and unscrew the leveling legs to make them
longer. Screw them in tighter to make them shorter.
Note: This cooler is not designed to operate with the leveling legs removed.
Bottle Capacity
Bottle capacity listed for your wine cooler is an estimated maximum capacity
based on standard 750 mL wine bottles. For any other size bottles, capacity
will vary.
5