Bosch UC MCM 5100 User Manual
7
Built-in Safety Cutout
The Bosch Food Processors are provided
with a built-in safety cutout to protect the
motor against overheating.
with a built-in safety cutout to protect the
motor against overheating.
If the safety cutout should open:
a. Turn the processor to the off position
“O/Off” and unplug.
b. Contact Bosch Small Appliances
Customer Support, see page 6, for
closest Bosch authorized service
center.
closest Bosch authorized service
center.
c. Take, or ship, the food processor to
a Bosch authorized service center to
have the safety cutout replaced.
have the safety cutout replaced.
Safety Cover Interlock
The Bosch Food Processor incorporate in
their design a special safety feature; the
Safety Cover Interlock, figure 2c. This
feature prevents the rotary switch from
being turned from the Off position, “O/Off,”
if cover has not been placed on the bowl
properly and rotated to trip the Safety Cover
Interlock.
The Bosch Food Processor incorporate in
their design a special safety feature; the
Safety Cover Interlock, figure 2c. This
feature prevents the rotary switch from
being turned from the Off position, “O/Off,”
if cover has not been placed on the bowl
properly and rotated to trip the Safety Cover
Interlock.
Safety Motor Drive Cover
Another special safety feature incorporated
in the
Another special safety feature incorporated
in the
Bosch Food Processors is the Safety
Motor Drive Cover, figure 2d.
The Safety
Motor Drive Cover must be in place on the
high speed blender drive when not in use
or the motor will not start when turned to
one of its On positions, or if removed while
power unit is running will bring the power
unit to a stop.
high speed blender drive when not in use
or the motor will not start when turned to
one of its On positions, or if removed while
power unit is running will bring the power
unit to a stop.
Dual drives
The Bosch Food Processors come with
three drives:
three drives:
• A high-speed drive directly coupled to
the motor, used to drive the blender and
other special accessories, located
under the Safety Motor Drive Cover,
figure 2e.
other special accessories, located
under the Safety Motor Drive Cover,
figure 2e.
• A dual drive, figure 2f, used by bowl
accessories: one high-torque drive used
to drive dough hook, citrus juicer and
other special accessories requiring high
torque; and, a high speed drive used to
drive the multifunction blade, beater,
whipping whisk and other accessories
requiring higher speeds.
to drive dough hook, citrus juicer and
other special accessories requiring high
torque; and, a high speed drive used to
drive the multifunction blade, beater,
whipping whisk and other accessories
requiring higher speeds.
Convenient cord storage
The MCM 5200 UC model stores the cord
internally, on an automatic cord winder, see
figure 2g.
The MCM 5200 UC model stores the cord
internally, on an automatic cord winder, see
figure 2g.
Four rubber feet
Four rubber feet provide the ultimate in
stability, while also serving to isolate the
power unit from the hard surface to minimize
noise and vibration, figure 2h.
Four rubber feet provide the ultimate in
stability, while also serving to isolate the
power unit from the hard surface to minimize
noise and vibration, figure 2h.
Special features of mixing bowl
The mixing bowl has a number of special
features:
The mixing bowl has a number of special
features:
Dual feeding tube
The three-quart capacity mixing bowl comes
with two feeding tubes molded into the cover.
The small tube may be used for slicing or
grating items that you wish to stand on end.
The three-quart capacity mixing bowl comes
with two feeding tubes molded into the cover.
The small tube may be used for slicing or
grating items that you wish to stand on end.
Pusher/measuring cup
In addition to its ability to act as both a
pusher and a measuring cup, the slimmer
portion of the pusher has a hole at the
bottom to allow it top be used as a funnel
when liquids need to be added to the
mixture in the bowl. See figure 3a.
In addition to its ability to act as both a
pusher and a measuring cup, the slimmer
portion of the pusher has a hole at the
bottom to allow it top be used as a funnel
when liquids need to be added to the
mixture in the bowl. See figure 3a.
Filling tray
The MCM 5200 UC, Bosch Food
Processor, also comes with a filling tray
that can be mounted on the feeding funnel
to simplify the feeding of material into the
bowl, figure 3b.
The MCM 5200 UC, Bosch Food
Processor, also comes with a filling tray
that can be mounted on the feeding funnel
to simplify the feeding of material into the
bowl, figure 3b.