Bosch UC MCM 5100 User Manual

Page of 28
8
Figure 3.
Getting Started
The operation of your Bosch Food
Processor is summarized below.
Specific instructions for using each of the
attachments, provided with the food
processor systems covered by this manual,
follow the summarized instructions. Please
read the specific instructions thoroughly
before using that attachment, paying
particular attention to the IMPORTANT
SAFEGUARDS and WARNINGS provided.
1.
Place power unit on suitable work
surface.
Before using the food processor with
any of the attachments, the power unit
should be placed on a suitable work
surface. The surface should be sturdy,
smooth and clean; make sure that
there is no flour or oil on the surface.
A clean, smooth surface will provide
the best footing for the suction cup feet
on the power unit and will limit slipping
and/or “walking,” see figure 2h.
2.
Plug power unit into power supply.
Pull the power unit’s cord out to
appropriate length and plug it into a
convenient nearby outlet.
3.
Select attachment to be used.
Select the attachment you wish to use.
4.
Cover the drive not being used.
If dual drive is to be used for selected
attachment, make sure that safety
motor drive cover is placed over the
high speed blender drive and pressed
down until it snaps in place.
If high speed blender drive is to be
used, remove the safety motor drive
cover from the high speed blender
drive and place mixing bowl over dual
drive and turn clockwise to lock into
position as shown in figure 4a. Next
place the mixing bowl cover, with
pusher/measuring cup in the feeding
tube, on the bowl. Make sure arrows
on cover and bowl are aligned, so that
tabs on bowl fit into channels in cover
and then turn cover clockwise until  tab
on cover enters cover interlock and
turn until tab clicks into place, figure
4b.
Figure 4.
 5.
Place selected attachment.
Place the selected attachment on
power unit. See specific instructions
for attachment selected. Specific
instructions are located on pages
listed below:
Attachment
Pages
Bowl w/multifunction blade .....  10–12
with dough hook .......................... 12
with whipping whisk/beater ..... 13-14
with slicing and grating disc .... 14-16
Blender ..................................... 16–18
Citrus juicer .............................. 19-20
Juice extractor ........................... 20–21
Table 1.