DeLonghi 10.13 User Manual

20

FILL TANK 

Insufficient water in the tank.

Fill the tank with water and/or insert it 

correctly, pushing it as far as it will go until it 

clicks into place.

EMPTY GROUNDS CONTAINER  The grounds container (A22) is full. 

Empty the grounds container and drip tray, 
clean and replace. Important: when removing 
the drip tray, the grounds container must be 
emptied, even if it is not completely full. 
If this is not done, when you make the next 
coffees, the grounds container may fill up more 
than expected and clog the machine.

GROUND TOO FINE ADJUST 
MILL

The grinding is too fine and the coffee is 

delivered too slowly or not at all.

The grinding is too fine and the coffee is 

delivered too slowly or not at all.

Repeat coffee delivery and turn the grinding 

adjustment dial (fig. 10) one click clockwise to-

wards “7” while the coffee mill is in operation. 

If after making at least 2 coffees delivery is 

still too slow, repeat the correction procedure, 

turning the grinding adjustment dial another 

click until delivery is correct (see the section: 

“Adjusting the coffee mill” on page 12).  If the 

problem persists, make sure the water tank is 

fully inserted, press the

 

 

button and 

deliver a little water from the spout. 

INSERT GROUNDS CONTAINER After cleaning, the grounds container has not 

been replaced.

Remove the drip tray and insert the grounds 

container.

ADD PRE-GROUND COFFEE

With the pre-ground function selected, 

pre-ground coffee has not been poured into 

the funnel.

Place pre-ground coffee in the funnel or 

deselect the “pre-ground” function (fig. 17).

DESCALE 

The machine must be descaled. 

The descaling procedure described in the 

section “Descaling” needs to be performed as 

soon as possible (page 17).

LESS COFFEE 

Too much coffee has been used. 

Select a milder taste by pressing the dial

 

(fig. 9) or reduce the quantity of pre-ground 

coffee.

FILL BEANS CONTAINER

The coffee beans have run out. 

Fill the beans container (fig. 13).

The pre-ground coffee funnel is clogged.

Empty the funnel with the help of a brush as 

described in the section “Cleaning the pre-

ground coffee funnel”.

INSERT INFUSER ASSEMBLY 

The infuser has not been replaced after 

cleaning.

Insert the infuser as described in the 

paragraph “Cleaning the infuser”.

INSERT TANK

The tank is not correctly in place.  

Insert the tank correctly and press as far as it 

will go.