Summit AL-652B Instruction Manual

 

 

 

 

Place the appliance in a dry and regularly ventilated room.  Allowed ambient  

 

temperature depends on the model (class) of the appliance and is stated on the  

 

rating plate of the appliance. 

 
 

 

SN (sub-normal) 

from + 56°F to + 90°F 

N (normal) 

from + 62°F to + 90°F 

ST (sub-tropical) 

from + 64°F to +100°F 

T (tropical) 

from + 64°F to +120°F 

 

The appliance may be exposed to lower or higher temperatures but only for a       
shorter period of time and the temperature should never be lower than 41°F. 

 

Never place the appliance near heat emitting devices (e.g. cooker, radiator, water  

 

heater or similar devices) and do not expose it to direct sunlight. 

 

 

  It is important to make sure the appliance is leveled evenly to prevent falling. 

 
 
 

  Two spacers attached to the appliance must be fitted onto the upper edge of the 

condenser, thus preventing the appliance from being installed too close to the 
wall.  Spacers are manufactured for all-purpose functions depending on the 
distance of the condenser from the wall.  Therefore turn spacers correspondingly 
and adjust them accordingly to the appliance. 

 

Connection to Power Supply 
 

Connect the appliance with the cable and plug to the power supply socket outlet 
with a ground terminal (safety socket). 

 

“DO NOT USE AN EXTENSION CORD.” 

 

Required nominal voltage and frequency are indicated on the rating plate. 
The connection to the power supply and grounding has to be made according to 
current standards and regulations.  The appliance resists temporary voltage 
tolerance up to -15 to 10%.