SMART Technologies 8070i-SMP and 8070i User Manual
g
To clean the camera windows and reflective tape
1. Gently wipe the reflective tape along the sides of your interactive flat panel screen.
2. Gently wipe the camera windows in the bottom corners and the reflective strip across the
bottom of your interactive flat panel screen.
Maintaining ventilation
Your interactive flat panel requires ventilation to enable the cooling fans to function. Dust buildup in
the ventilation holes compromises cooling and leads to product failure.
C A U T I O N
Avoid setting up or using your interactive flat panel in an area with excessive levels of dust,
humidity or smoke.
l
Clean accessible ventilation holes monthly with a dry cloth.
l
Use a vacuum cleaner with a narrow hose end fitting to clear the back ventilation holes
annually. You might have to remove the interactive flat panel from your wall. For more
information on removing your interactive flat panel see Removing your interactive flat panel on
Preventing condensation
Your interactive flat panel screen contains layers of glass that can collect condensation, especially in
the following conditions:
l
Temperature extremes with high humidity
l
Rapid changes in humidity, which can occur when you operate the product near water, such as
a sink, pool, kettle or air conditioner ventilator
l
Direct exposure to sunlight
g
To evaporate condensation from your interactive flat panel
1. Remove the humidity source from the interactive flat panel, if possible.
2. Adjust the room temperature to normal operating ranges.
3. Turn on the interactive flat panel for 2–3 hours.
If the screen condensation doesn’t evaporate, contact SMART Support
).
C H A P T E R 7
Maintaining your interactive flat panel
59