SMART Technologies 8070i-SMP and 8070i User Manual

Checking the interactive flat panel installation

Inspect your interactive flat panel installation frequently to ensure that it remains securely installed.

Check the mounting location for signs of damage or weakness that can occur over time.

Check for loose screws, gaps, distortions or other issues that could occur with the mounting

apparatus.

If you find an issue, refer to a professional installer.

Removing your interactive flat panel

To safely remove your interactive flat panel, use four or more professional installers.

W A R N I N G

Do not attempt to move the interactive flat panel using your own strength. The interactive flat

panel is very heavy.

Do not move the interactive flat panel by connecting a rope or wire to the handles on the

back. The interactive flat panel can fall and cause personal injury and product damage.

I M P O R T A N T

Follow the instructions included with the floor stand or mounting apparatus.

To remove the interactive flat panel

1. Turn off your interactive flat panel and unplug the power cable from the wall outlet.

2. Remove all accessible cables and connectors.

3. Attach the M12 eyebolts for your lifting equipment. For more information, see Wall-mounting

4. Lift your interactive flat panel from its mounting location.

C A U T I O N

Do not leave the interactive flat panel face up, face down or upside down for an

extended period of time as it could cause permanent damage to the screen.

Do not place the interactive flat panel on a sloping or unstable cart, stand or table,

because the interactive flat panel could fall, resulting in injury or severe product

damage.

C H A P T E R 7

Maintaining your interactive flat panel