ZyXEL Communications Vantage Access User Manual

Chapter 15 WAN Device

Vantage Access User’s Guide

Use the PortMapping screen to view the port mapping instance for the WAN IP connection. 
Refer to 

 for other field descriptions.

1 Select a registered device in the Device List window and click InternetGatewayDevice 

> WANDevice. 

LastConnectionError

This field displays the cause for the last failed connection attempt. 

AutoDisconnectTime

This field displays the number of seconds (between 0 and 4294967295) the 
device is to wait before disconnecting the link.

IdleDisconnectTime

This field displays the number of seconds (between 0 and 4294967295) of 
inactivity timeout for a link. When the time is reached without any network 
activity through the link, the device automatically disconnect the link. 

WarnDisconnectDelay

This field displays the number of seconds (between 0 and 4294967295) 
before the device disconnects the link. 

RSIPAvailable

This field displays whether the Realm-specific IP (RSIP) feature is 
supported on the device. 

NATEnabled

This field displays 1 to indicate that the NAT (Network Address Translation) 
feature is enabled for this link; otherwise the field displays 0. 

AddressingType

This field displays DHCP to set the device to obtain a dynamic IP address 
from the ISP for this link on the WAN. 
This field displays Static to set the link to use a fixed WAN IP address. 
Then configure the fields below. 

ExternalIPAddress

This field is applicable when you select Static in the AddressingType field. 

SubnetMask

This field is applicable when you select Static in the AddressingType field. 

DefaultGateway

This field is applicable when you select Static in the AddressingType field. 

DNSEnabled

This field displays 1 to set the device to resolve domain names through this 
link; otherwise, this field is 0. 

DNSOverrideAllowed

This field displays 1 to allow a non-empty DNS address to be replaced by a 
DNS entry received on the WAN; otherwise, this field is 0. 

DNSServers

This field displays the IP address(es) of the DNS server(s). Multiple IP 
addresses are separated by a comma. 

MaxMTUSize

This field displays the maximum size (between 1 and 1540) for the Ethernet 
frames allowed on this link. 

MACAddress

This field is applicable when you select Enable in the 
MACAdddressOverride field.
This field displays the MAC address on this link. 

MACAddressOverride

This field displays 1 to change the MAC address of this interface in the 
MACAddress field. 
This field is 0 if you do not allow MAC address modification. 

ConnectionTrigger

This field displays how the device will establish a connection for Internet 
access. Choices are AlwaysOn, OnDemand and Manual. 

RouteProtocolRx

This field displays the routing protocol (RIP1, RIP2 or OSPF) the link is to 
use. Off means the routing feature is disabled. 

PortMappingNumberOfE
ntries

This field displays the number of port mappings on this link.

Table 59   TR-069: WAN Device: WANIPConnection: Details (continued)