ZyXEL Communications Vantage Access User Manual

 Chapter 15 WAN Device

Vantage Access User’s Guide

2 Click a number and WANConnectionDevice. 
3 Click a number and WANIPConnection. 
4 Click a number and PortMapping to display the screen as shown. 

Figure 123   TR-069: WAN Device: WANIPConnection: PortMapping   

Use the detailed PortMapping screen to configure the port mapping settings for the WAN IP 
connection.

1 Select a registered device in the Device List window and click InternetGatewayDevice 

> WANDevice. 

2 Click a number and WANConnectionDevice.
3 Click a number and WANIPConnection. 
4 Click a number and PortMapping. 
5 Click a number to display the screen as shown. 

Figure 124   TR-069: WAN Device: WANIPConnection: PortMapping: Details   

The following table describes the labels in this screen. Refer to 

 for 

other field descriptions. 

Table 60   TR-069: WAN Device: WANIPConnection: PortMapping: Details 

PortMappingEnabled

This field displays 1 to indicate that the port mapping entry on this link is 
enabled; otherwise this field displays 0. 

PortMappingLeaseDurati
on

This field displays the time (between 1 to 4294967295 seconds) the device 
stores the port mapping entry. After this, the entry is removed from the port 
mapping table. 
0 means that a port mapping entry is static and cannot be removed from 
the port mapping table. 

RemoteHost

This field displays the IP address of the remote host device.
If this field is blank, it indicates a wildcard which the device must support. In 
this case, when a packet is sent to the external port on the WAN, the device 
will forward the packet to the internal port.