Smeg KCVR9NE User Manual
EN
KCVR9NE
Operating Features
Keypad with 10 touch buttons + 2 digit display + IR-RX
Keypad with 10 touch buttons + 2 digit display + IR-RX
Buttons from left to right:
• MOTOR ON/OFF
Starts and stops the blower motor. The display shows the current speed
setting.
• SPEED –
Reduces motor speed: V4 → V3 → V2 → V1
Starts and stops the blower motor. The display shows the current speed
setting.
• SPEED –
Reduces motor speed: V4 → V3 → V2 → V1
• SPEED +
Increases motor speed: V1 → V2 → V3 → V4
Increases motor speed: V1 → V2 → V3 → V4
• BOOST-SPEED MODE
Enables BOOST-SPEED mode from any motor speed or when motor is off.
To disable BOOST-SPEED, press the button again and stop the motor.
BOOST-SPEED mode is set to operate for 10 minutes: during which the
display alternatively shows HI and the remaining time and the dot at the
bottom right flashes every second.
After 10 minutes the system automatically reverts to the previous speed
setting.
Enables BOOST-SPEED mode from any motor speed or when motor is off.
To disable BOOST-SPEED, press the button again and stop the motor.
BOOST-SPEED mode is set to operate for 10 minutes: during which the
display alternatively shows HI and the remaining time and the dot at the
bottom right flashes every second.
After 10 minutes the system automatically reverts to the previous speed
setting.
• 24H AIR CHANGE
Starts the blower motor at a speed that provides a flow rate of about 100
m3/h. When 24h AIR CHANGE is enabled the display shows 24. 24h AIR
CHANGE cannot be enabled when either BOOST-SPEED or DELAY -OFF
is enabled.
Starts the blower motor at a speed that provides a flow rate of about 100
m3/h. When 24h AIR CHANGE is enabled the display shows 24. 24h AIR
CHANGE cannot be enabled when either BOOST-SPEED or DELAY -OFF
is enabled.
• DELAY
Enables and disables the hood’s complete shutdown (motor+lights) after 30
minutes: during which the display alternatively shows the motor speed and
the minutes remaining and the dot at the bottom right flashes every second.
Enables and disables the hood’s complete shutdown (motor+lights) after 30
minutes: during which the display alternatively shows the motor speed and
the minutes remaining and the dot at the bottom right flashes every second.
To disable the DELAY press the button again or stop the motor.