Gigaset S45 HANDGIGAS45 User Manual

Product codes

HANDGIGAS45

System settings

E45-S45-SL55 ISDN-Basen / en / A31008-M368-B103-1-7619 / settings_bs.fm / 23.03.2006

Setting up an internal group call group

You can make a group call from any handset to all other registered internal subscribers

(page 18).
By default, all registered subscribers with the device type "telephone" or "neutral" are set

up in the group call group.

Setting up ring delay

Ring delay can be used to individually set up one subscriber per receive MSN to ring

later. During this ring delay time, the handset can take the call using the "Accept?"

function without hearing a ring. The ring delay time is specified in ring cycles. A ring

cycle lasts 5 seconds.
Take into account the response time of the answering machine when making this set-

ting (default: Automatic 2/4). If the set ring delay is longer than the setting for an active

answering machine, the phone will not ring because the answering machine will pick

up the call first.
For each programmed MSN, at least one subscriber must be able to be called immedi-

ately. Therefore, a subscriber set up for ring delay will be called immediately if it is the

only one on this receive MSN, or no one else can be reached on this receive MSN.
Picking up a call during ring delay see page 20.

Base

Settings

Setup user

Setup device

INT11: Int.11

Select the internal number, e. g. INT 11: Int.11.

Open the submenu.

Hunt group

Select and confirm (

‰ = activated).

Base

Settings

Setup user

Setup device

INT11: Int.11

Select the internal number, e. g. INT 11: Int.11.

Open the submenu.

Ring delay

Select and confirm.

MSN1:

Select receive MSN, e. g. MSN11: Anna

and confirm.

Enter No. of rings.