Aleratec 260203 User Manual

www.aleratec.com

35

Note: If the number of blank discs you inserted doesn’t match the 
number of discs detected on the screen, please give 10-15 seconds 
for the duplicator to recognize all of your blank discs.

e.  After 2 or 3 seconds of processing time, the following Copy Progress 

Screen will appear.

Note: It is normal to see the progress indicator stay at 0-10% and at 
100% for approximately 30 seconds during CD duplication. Additionally 
it is normal to see the progress indicator stay at 0-10% and at 100% for 
up to 1 minute during DVD duplication. There is a delay caused by the 
initializing and finalizing stage of disc duplication. Due to this delay, it is 
normal to see progress indicators stay at 100% for up to several minutes 
before moving on. Once the disc duplication is completed, successful 
copies will be ejected and you will see the following display:

“PASS 7” indicates that you’ve just made 7 

successful copies.

“FAIL 0” indicates that you have no failure in 

this run.

“7” indicates that you’ve successfully copied 7 

copies so far.

Counter Specified

No Counter

“4012MB” indicates the capacity of the Master 

Disc.

“481MB” indicates the current MB from the 

Master Disc that has been copied.

“12%” indicates the current progress of the 

duplication.

“0/21” indicates you have a project size of 21 

copies and you have made 0 copies so far.

“H” indicates you are copying from a Hard 

Drive Image.

“4012MB” indicates the capacity of the Master 

Disc.

“481MB” indicates the current MB from the 

Master Disc that has been copied.

“12%” indicates the current progress of the 

duplication.

“0” indicates that you have made 0 copies so 

far.

“H” indicates you are copying from a Hard 

Drive Image.











