Adaptec ACS-100 User Manual

If you have problems installing or using your Adaptec ACS-100 
USB Enclosure, work through this list of suggestions:

■

Ensure that the disk drive has been properly installed.

■

Try connecting the enclosure to your computer through a 
different USB port.

■

Try connecting the enclosure to your computer using a different 
USB cable.

■

Try connecting the enclosure to a different power source.

■

Windows 98SE users—If you connected and powered on your 
USB Enclosure before you installed the device drivers:

On your desktop, right-click My Computer, select 
Properties

, then click the Device Manager tab.

Expand the categories to find your USB device, which will 
appear with a yellow exclamation mark beside it. Select the 
enclosure, then click the Remove button at the bottom of the 
window.

Power off the enclosure and disconnect the USB cable.

Complete the driver installation, following the instructions 
on 

Connect the USB cable and power on the enclosure, 
following the instructions on 

.

Adaptec is committed to excellence in quality and support. Go to 

www.adaptec.com/go/accessories

 for replacement questions.

For technical assistance initiating and formatting your disk drive, 
please contact Microsoft (Windows users) or Apple (Macintosh 
users).