Adaptec ACS-100 用户手册
11
Troubleshooting
If you have problems installing or using your Adaptec ACS-100
USB Enclosure, work through this list of suggestions:
USB Enclosure, work through this list of suggestions:
■
Ensure that the disk drive has been properly installed.
■
Try connecting the enclosure to your computer through a
different USB port.
different USB port.
■
Try connecting the enclosure to your computer using a different
USB cable.
USB cable.
■
Try connecting the enclosure to a different power source.
■
Windows 98SE users—If you connected and powered on your
USB Enclosure before you installed the device drivers:
USB Enclosure before you installed the device drivers:
a
On your desktop, right-click My Computer, select
Properties
Properties
, then click the Device Manager tab.
b
Expand the categories to find your USB device, which will
appear with a yellow exclamation mark beside it. Select the
enclosure, then click the Remove button at the bottom of the
window.
appear with a yellow exclamation mark beside it. Select the
enclosure, then click the Remove button at the bottom of the
window.
c
Power off the enclosure and disconnect the USB cable.
d
Complete the driver installation, following the instructions
on
on
e
Connect the USB cable and power on the enclosure,
following the instructions on
following the instructions on
.
Adaptec is committed to excellence in quality and support. Go to
www.adaptec.com/go/accessories
for replacement questions.
For technical assistance initiating and formatting your disk drive,
please contact Microsoft (Windows users) or Apple (Macintosh
users).
please contact Microsoft (Windows users) or Apple (Macintosh
users).