Haier KGG6201-A1 User Manual

*DV FRQQHFWLRQ

The cooker should be connected to a gas 
supply of the particular type of gas that the 
appliance is manufactured to function with. 
Information about the type of gas that the 
cooker has been adapted to by the factory 
is shown on the data plate. The cooker 
should be connected exclusively by an 
appropriately authorized fitter and only he 
or she has the right to adapt the cooker to 
a different type of gas. 

ƽ   ,QVWDOOWKHVSODVKEDFN

 

ƽ   Install the cooktop 

Take the crown caps and burner 
crowns out of the oven, and put them 
to the correct place on the cooktop. 

 

The installation must be tied in very 
well.  

Crown cap and Burner crown must be tie in 
very well, otherwise the flame may not 
soundness. Once this happened, close the 
tap, re-install the crown cap and burner 
crown when the cooker is cooling down.

 

To fit the rear panel/splashback, 

 

panel into the matching slots on rear 

provided.

slide the lugs on the bottom of the

of stove and fix with screws 

)LWWLQJJXLGHOLQHV

A fitter should: 

 

z  have a gas fitter’s authorisation 

z  be acquainted with the information 

included on the data plate of the 
cooker about the type of gas to which 
the cooker is adapted; the information 
should be compared with gas supply 

conditions at the place of installation. 

GB

&DXWLRQ 

&DXWLRQ 

32

+RVH FRQQHFWLRQ

z  Connect the appliance  to the gas 

coupling by means of certified flexible 
hose. The hose may not touch the 
bottom panel of the appliance or the 
rear panel and ceiling of the oven. 

z  Connect the appliance in accordance 

with the regulations of the local gas 
supplier. 

On completion of the cooker installation, 
the tightness of all connections should be 
checked, e.g. applying water with soap. 
Do not use fire to check tightness. 

)OH[LEOHKRVH FRQQHFWLRQ

In case the appliance is connected by 
means of a flexible hose the position A of 
the hose is not permissible. 
In case the connection hose is made of 
metal, position A is permissible. 

A

B

C

D

%HJLQQLQJ RIRSHUDWLRQ

Start using the appliance in accordance 
with the instructions for use. 

 
Lit up all burners and check the stability of 
the flame with high and low setting. Adjust 
air intake if necessary. After that, take time 
and explain the operation and control of 
the appliance to the user and read with him 
the instructions for use. 

Liquefied gas connection 

The cooker may only be connected to a 
liquid gas cylinder or the existing gas 
supply by an authorized fitter, observing all 

safety rules. 

z  check: 

-airing efficiency, that is efficiency of 
air exchange in the rooms, 
-tightness of gas fitting connections, 
-effectiveness of all functional 
elements of the cooker, 
-if the electricity supply is adapted to 
function with a safety ground lead 
(zero) 

z  provide the user with a connection 

certificate and give him or her 
instructions in cooker use. 

GB

&DXWLRQ 

&DXWLRQ 

33