Lexmark C762 User Manual
PostScript
4-68
InstalledRam
integer
(Read-only) Indicated, in bytes, the total amount of installed
printer memory (RAM) in the system.
printer memory (RAM) in the system.
Note:
InstalledRam should not be confused with RamSize
which is the amount of memory (RAM) available to the
formatting interpreters and the graphics engine.
formatting interpreters and the graphics engine.
JobTimeout
integer
The value in seconds to which the user parameter
JobTimeout
is initialized at the beginning of each print job. If
you set the system parameter
JobTimeout
to a negative
value, it is ignored and the previous setting of
JobTimeout
is
used. A value of 0 (zero) indicates that the timeout is infinite.
If you set a number between 1 and 14, 15 is set.
If you set a number between 1 and 14, 15 is set.
Legal values: x = 0, 15 <= x <= 65355
languagelevel
integer
The value of
languagelevel
integer in systemdict always
matches the value of this system parameter. If set to 2, the
printer will behave as though /UseOldcopypage and
/UseOldfonts are both true (regardless of their actual values).
The latter two parameters will return their actual values when
queried.
printer will behave as though /UseOldcopypage and
/UseOldfonts are both true (regardless of their actual values).
The latter two parameters will return their actual values when
queried.
Legal Values: 2, 3
MaxDisplayAndSourceList
2
integer
(Read-only) This value is always the same value as
InstalledRam
.
MaxDisplayList
integer
(Read-only) See Table C-4 on page C-9 for the default value
of your printer.
of your printer.
MaxFontCache
integer
(Read-only) See Table C-4 on page C-9 for the default value
of your printer.
of your printer.
MaxFormCache
integer
Maximum bytes occupied by the form cache.
Legal value: Any non-negative integer.
MaxImageBuffer
integer
(Read-only) See Table C-4 on page C-9 for the default value
of your printer.
of your printer.
MaxOutlineCache
integer
(Read-only) See Table C-4 on page C-9 for the default value
of your printer.
of your printer.
MaxPatternCache
integer
Maximum bytes occupied by the pattern cache.
Legal value: Any non-negative integer.
MaxPermanentVM
2
integer
(Read-only) See Table C-4 on page C-9 for the default value
of your printer.
of your printer.
MaxRasterMemory
integer
(Read-only) See Table C-4 on page C-9 for the default value
of your printer.
of your printer.
MaxScreenStorage
integer
(Read-only) See Table C-4 on page C-9 for the default value
of your printer.
of your printer.
Table 4-10: PostScript Emulation System Parameters (Continued)
Key
Type
Definition
1
These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016.
2
These parameters are available with the Adobe PostScript Language Supplement 3010.
3
These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 3010.