Graco SDM15 User Manual

Dispensing Fluid and Operation Mode Screens

312865R

Manual Dispense

. 19)

All Meters

See F

. 19 for terms D - H

D. Information Banner: Configurable information
banner. Data is input on Setup Mode Banner Screen,
page 19.

E. Unit of Measurement: Identifies unit of
measurement, pint, quart, gallon or liter. Measurement
Unit is set on Setup Mode Units/Limits Screen, page
15.

F. Home Icon: Returns user to Home Screen.

G. Reset: Resets counter (H) to zero.

H. Counter: Before dispense has begun, display reads
0.00. As fluid is dispensed, counts up from zero.

To reset counter to zero after a dispense:

1. Use the LEFT or RIGHT ARROW button to move

curser to RESET (G).

2. Press center ENTER button. The displayed amount

in field H returns to zero.

To dispense in Manual Mode:

If display was asleep, press any button to wake it up.

1. From HOME screen, use the UP or DOWN

ARROWS to select MANUAL (F

. 20).

2. Press center, ENTER button to confirm selec-

tion.The Manual Dispense screen (F

. 21)

appears.

3. Squeeze trigger to dispense fluid. If using a Preset

meter, trigger may be locked during the dispense.

Fluid flows. The amount displayed counts up from zero or
from the previously dispensed amount
(F

. 21) and displays in field H.

4. Release, or for Preset meters only, unlock trigger

when you have dispensed the desired amount of
fluid.

Fluid flow stops. Amount dispensed displays in field H.

5. Use LEFT or RIGHT ARROW to move curser to

RESET button (G). Press center ENTER button to
reset the displayed amount in field H to zero.

. 19

MOBIL1 5W-20

10.56

QTS

ti12178a

. 20

. 21

MOBIL1 5W-20

MANUAL

PRESET

TOTALS

ti12180a

Preset shown

MOBIL1 5W-20

10.56

QTS

ti12178a