Graco SDM15 User Manual

a. Use the UP or DOWN ARROW to scroll up or 

down to increase or decrease the amount 
shown in field L. Each time you press the UP or 
DOWN ARROW the amount will increase or 
decrease in increments of 0.1 units.

To speed up the scrolling progression, press 
and hold the UP or DOWN ARROW.

b.

IMPORTANT!!! When the new dispense 
amount is shown in field L, the number 
flashes, indicating a change has been made 
that requires confirmation. 

To confirm new amount you MUST PRESS 
the center, ENTER button on the key pad 
within 15 seconds. If you begin a dispense 
without confirming the new amount, the Preset 
Amount will return to the previous confirmed 
amount shown in field L. 

For example, in F

. 23 (below) the original, confirmed 

Preset Dispense amount (A) was 4.0 qts. The amount 
was increased to 8.0 quarts and because it has not 
been confirmed, is flashing on the screen (B). After the 
user confirmed this change by pressing the center 
ENTER button on the key pad, the new dispense 
amount no longer flashes and is now set to dispense 8.0 
quarts (C).

To permanently modify the default Preset Quantities,
see To set Preset amounts: on page 18.

MOBIL1 5W-20

2.50

QTS

4.0

8.0

8.0

A

B

C