HP (Hewlett-Packard) 179776-002 User Manual

Installation Overview

For use with 350-MHz or greater Intel processor-based servers only

Writer: Cheri Stewart   Project: Compaq ProLiant 3000 Servers Setup and Installation Guide   Comments: 179776-002

File Name: C-CH02.DOC   Last Saved On: 1/12/99 3:15 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

WARNING:    To reduce the risk of personal injury from hot
surfaces, allow the hot plug drives and internal system
components to cool before touching.

WARNING:    To reduce the risk of electric shock or damage to
the equipment:

■ 

Do not disable the power cord grounding plug. The
grounding plug is an important safety feature.

■ 

Plug the power cord into a grounded electrical outlet that
is easily accessible at all times.

■ 

Install the power supply before connecting the power cord
to the power supply.

■ 

Unplug the power cord before removing the power supply
from the server.

■ 

If the system has multiple power supplies, disconnect
power from the system by unplugging all power cords
from the power supplies

CAUTION:    Protect the server from power fluctuations and
temporary interruptions with a regulating uninterruptible power
supply (UPS). This device protects the hardware from damage
caused by power surges and voltage spikes and keeps the
system in operation during a power failure.

CAUTION:    The Compaq ProLiant Server

 

must always be

operated with the system unit cover on. Proper cooling will not
be achieved if the system unit cover is removed.

IMPORTANT:    Because of the 100 to 120 VAC electrical rating of each
power supply, some local electrical authorities may require either one
15-Ampere circuit for each power supply or one 20-Ampere circuit for
each pair of power supplies.