Lucent Technologies 555-230-220 User Manual

Page of 522
ASAI and Call Control
Issue  7 May 1998
4-25
!
WARNING:
The customers should be careful when mixing voice call traffic with Phantom 
Call traffic in a queue. The call handling times should be considered and if 
Phantom Calls are expected to remain in queue much longer than voice 
calls, they could impact the delivery of the voice calls and cause misleading 
measurements.
Parameters for Phantom Calls
This list contains the ASAI interface call parameters for Phantom calls. 
orig_addr
[mandatory] The originator is an extension 
corresponding to a station AWOH or a group whose 
members are AWOH.
dest_addr
[mandatory] Must be a valid extension number or 
off-ECS number. An on-ECS extension may be a 
station extension, VDN, split, hunt group, or 
announcement extension. The dest_addr may 
include TAC/ARS/AAR information for off-ECS 
numbers. Trunks without disconnect supervision 
cannot be used.
dest_route_select
[optional] If present, it contains the TAC/ARS/AAR 
information for off-ECS numbers, if they were not 
present in the dest_addr.
priority_calling
[optional] If present, a priority call is placed if the 
destination is a local extension. If the priority flag is 
specified for an off-ECS destination, the call is 
denied. The default is nonpriority.
max_rings
N/A (ignored)
direct_agent_call
[optional] if present, this indicates that the Phantom 
Call will be a direct agent call.
supervisor_assist
Must not be present
alert_order
[optional] If present must be NO (alert originator 
first) It is recommended that this item not be 
present.
service circuit
Must not be present