Lucent Technologies 555-230-220 User Manual
ASAI and Call Control
Issue 7 May 1998
4-73
NOTE:
For more information regarding protocol errors and a complete list of
reason codes (cause values), see the
reason codes (cause values), see the
DEFINITY Enterprise
Communications Server CallVisor ASAI Protocol Reference
,
555-230-221.
Considerations
■
DTMF signals may be sent to any extension type on the call.
■
If a character sequence with a length greater than 32 is supplied, only the
first 32 characters in the sequence will be accepted (the remaining
characters will be ignored).
first 32 characters in the sequence will be accepted (the remaining
characters will be ignored).
■
The ECS does not provide any signal to the adjunct when transmission has
completed.
completed.
■
If using the default timing, each digit sent will require 350 ms. Interdigit
timing is 100 ms.
timing is 100 ms.
■
While DTMF signals are being transmitted, all parties on the call will be
disconnected from the talk path.
disconnected from the talk path.
■
If a party drops from the call while tones are being sent and others remain
on the call, signals will continue to be sent to the remaining parties.
on the call, signals will continue to be sent to the remaining parties.
■
Tones originating from the ECS will not be listen-disconnected; for
example, Send DTMF tones (generated through ASAI) would still be heard
by the disconnected listener.
example, Send DTMF tones (generated through ASAI) would still be heard
by the disconnected listener.
■
Send DTMF may not be invoked on a call already receiving any other type
of DEFINITY ECS-generated tone.
of DEFINITY ECS-generated tone.