Hobie V2 Drum User Manual

 

3

 
 
 
Vise method: 
 
3 B. Secure Drive to vise by rear 
portion as shown.  Use a rag in 
vise to prevent marks (rag 
removed for illustration purposes, 
right). 
 
 
4 B.  Mount both drum / crank arm 
assemblies to drum shaft, noting 
correct left and right side. 
 
 
5 B.  Mount the rear sprocket cable.  Note, the cable is first inserted from the 
side, with the help of needle nose pliers if necessary, then re-routed over the top 
lip of the drum.  Hand thread Nyloc nuts enough to keep the cable from slipping 

out (below). 

 
 
6 

B.  Repeat procedure with the front sprocket cable. 
 
7 B.  Insert idler cable into lower rear 
drum hole as shown.  Note, the idler 
slot is divided -- use the outboard 
portion only (right).