AT&T MLS-6TM User Manual

Fax Machine

#601

Extensions

If you have a fax machine connected to the system and want to

monitor its status with a Fax Management button (see the  System Manager’s

Guide, chapter 7), use this procedure to identify the fax extension.

 1 = Extension assigned

✓   

2 = Extension not assigned

To prevent other extensions from interrupting a fax call, program the fax
extension for Automatic Privacy (#304).

You can install both  a telephone and a fax machine on the same extension
using an AT&T 267F2 bridging adapter.  This lets you receive both voice and
fax calls on the same line (but not at the same time).  If you pick up the
phone and hear a fax signal, you can simply hang up to let the fax machine
receive the call.

In addition,  if the telephone on the extension is a PARTNER phone with

lights, the light on the button for the fax line shows whether the fax machine
is in use or busy.

1.   Press 

[ 

Feature  ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 6 ] [ 0 ] [ 1 ].  The 

display reads:

Facsimile

Extension:

2.   Enter the extension to be programmed.  For example, to select exten-

sion 30, press [ 3 ] [ 0 ].  The display reads:

Facsimile 30

2 Not Assigned

3.   To identify the extension as a fax machine, press [ Next Data ] until the

display reads:

Facsimile 30

1 Assigned

To program another extension, press [ Next Item ] or until the extension number
shows on the display.  Repeat step 3.

✓ 

= Factory 

Setting

To go to the next procedure:  [ Next Proc ]

To go to a specific procedure:  [ # ] [ x ] [ x ] [ x ]

To go to the previous procedure:  [ Prev Proc ]

(where XXX is the procedure number)

To return data to the factory setting:  [ Remove ]

To exit system programming:  [ Feature ] [ 0 ] [ 0 ] 

System Programming  

3-29