AT&T MLS-6TM Manuale Utente
Fax Machine
Code:
#601
Extensions
Description:
If you have a fax machine connected to the system and want to
monitor its status with a Fax Management button (see the System Manager’s
Guide, chapter 7), use this procedure to identify the fax extension.
Valid Entries:
1 = Extension assigned
✓
2 = Extension not assigned
Considerations:
To prevent other extensions from interrupting a fax call, program the fax
extension for Automatic Privacy (#304).
extension for Automatic Privacy (#304).
You can install both a telephone and a fax machine on the same extension
using an AT&T 267F2 bridging adapter. This lets you receive both voice and
fax calls on the same line (but not at the same time). If you pick up the
phone and hear a fax signal, you can simply hang up to let the fax machine
receive the call.
using an AT&T 267F2 bridging adapter. This lets you receive both voice and
fax calls on the same line (but not at the same time). If you pick up the
phone and hear a fax signal, you can simply hang up to let the fax machine
receive the call.
In addition, if the telephone on the extension is a PARTNER phone with
lights, the light on the button for the fax line shows whether the fax machine
is in use or busy.
is in use or busy.
Programming Steps
1. Press
[
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 6 ] [ 0 ] [ 1 ]. The
display reads:
Facsimile
Extension:
2. Enter the extension to be programmed. For example, to select exten-
sion 30, press [ 3 ] [ 0 ]. The display reads:
Facsimile 30
2 Not Assigned
3. To identify the extension as a fax machine, press [ Next Data ] until the
display reads:
Facsimile 30
1 Assigned
To program another extension, press [ Next Item ] or until the extension number
shows on the display. Repeat step 3.
shows on the display. Repeat step 3.
✓
= Factory
Setting
To go to the next procedure: [ Next Proc ]
To go to a specific procedure: [ # ] [ x ] [ x ] [ x ]
To go to the previous procedure: [ Prev Proc ]
(where XXX is the procedure number)
To return data to the factory setting: [ Remove ]
To exit system programming: [ Feature ] [ 0 ] [ 0 ]
System Programming
3-29