AT&T 555-230-894 User Manual
Option Switch Settings
H-2
September 1995 Issue 1
connected through a modular processor data module serving as the interface
link. The option settings for the modular processor data module (MPDM) in this
application are shown in Table H-1.
link. The option settings for the modular processor data module (MPDM) in this
application are shown in Table H-1.
Modem Pooling (Combined) Option
Settings
Settings
Combined Modem Pooling requires option switch settings on different modems
and modular trunk data modules. The following paragraphs describe the option
settings for each ap plication.
and modular trunk data modules. The following paragraphs describe the option
settings for each ap plication.
103JR Modem Option Settings
When the 103JR modem is used with a modular trunk data module, set the
options on the modular trunk data module as shown in Table H-2. Options for the
103JR modem are shown in Table H-3. When used for modem pooling, all
factory-furnished options on the modem are used.
options on the modular trunk data module as shown in Table H-2. Options for the
103JR modem are shown in Table H-3. When used for modem pooling, all
factory-furnished options on the modem are used.
Table H-1.
Option Switch Settings on the Modular Processor
Data Module for the Distributed Communications
System
System
Switch
Setting
9600 BAUD
ON
SYNC
ON
INT
ON
KYBD
ON
AANS
ON
All Others
OFF
Table H-2.
Option Switch Settings on the Modular Trunk Data
Module Used With 103JR Modem
Switch
Setting
300 baud
ON
SW
ON
SIGLS
ON
CN25
ON
All Others
OFF