AT&T 555-230-894 User Manual
475 Printer Connected to a G3 Management Terminal
September 1995 Issue 1
H-21
475 Printer Connected to a G3
Management Terminal
Management Terminal
The 475 printer can be connected to a G3 Management Terminal to provide hard
copies of administration data. It can also be used as an output receiving device
for station message detail recording. In each case, the printer option switch
settings are the same. Table H-17 shows the option switch settings for the 475
printer when it is used in these applications.
copies of administration data. It can also be used as an output receiving device
for station message detail recording. In each case, the printer option switch
settings are the same. Table H-17 shows the option switch settings for the 475
printer when it is used in these applications.
475 Printer Used as System Printer
The 475 printer can be connected to the DEFINITY System G3 as the system
printer to be used by the Report Scheduler. Table H-18 shows the option switch
settings for the 475 printer as a system printer.
printer to be used by the Report Scheduler. Table H-18 shows the option switch
settings for the 475 printer as a system printer.
475 or 476 Printer Used as Journal
Printer for Hospitality Feature
Printer for Hospitality Feature
The 475 or 476 printer can also be used as a journal printer to support the
hospitality feature. Table H-19 shows the option switch settings for the 475 and
476 printers in this application.
hospitality feature. Table H-19 shows the option switch settings for the 475 and
476 printers in this application.
When modular processor data module or modular trunk data module are used
with the 475 or 476 journal printers, the option switches on the modular
processor data module or modular trunk data module must be set as shown
Table H-20.
with the 475 or 476 journal printers, the option switches on the modular
processor data module or modular trunk data module must be set as shown
Table H-20.