Sony CPD-E400E User Manual
17
GB
* If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. A humming noise may be heard, but this is not a
malfunction.
Displaying this monitor’s name, serial number,
and date of manufacture.
and date of manufacture.
While the monitor is receiving a video signal, press and hold the
center of the control button for more than five seconds to display
this monitor’s information box.
center of the control button for more than five seconds to display
this monitor’s information box.
If the problem persists, call your authorized Sony dealer and give
the following information.
• Model name: CPD-E400E
• Serial number
• Name and specifications of your computer and graphics board.
the following information.
• Model name: CPD-E400E
• Serial number
• Name and specifications of your computer and graphics board.
Picture is ghosting
• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
• Check that all plugs are firmly seated in their sockets.
Picture is not centered or sized
properly
properly
• Adjust the size (page 10) or centering (page 10). Note that some video modes do not fill
the screen to the edges.
Edges of the image are curved
• Adjust the geometry (page 11).
Wavy or elliptical pattern (moire)
is visible
is visible
• Select MOIRE ADJUST and adjust the moire cancellation effect (page 12).
x
Problems caused by the connected computer or other equipment
• Change your desktop pattern.
Color is not uniform
• Degauss the monitor* (page 12). If you place equipment that generates a magnetic field,
such as a speaker, near the monitor, or if you change the direction the monitor faces, color
may lose uniformity.
may lose uniformity.
White does not look white
• Adjust the color temperature (page 11).
Letters and lines show red or blue
shadows at the edges
shadows at the edges
• Adjust the convergence (page 12).
Monitor buttons do not operate
(
(
appears on the screen)
• If the control lock is set to ON, set it to OFF (page 13).
A hum is heard right after the
power is turned on
power is turned on
• This is the sound of the auto-degauss cycle. When the power is turned on, the monitor is
automatically degaussed for five seconds.
Symptom
Check these items
MENU
MODE L : CPD - E 4 0 0 E
SER NO : 1 2 3 4 5 6 7
MANUF ACTURED : 1 9 9
I NFORMA T I ON
9 - 5 2
Example
b