Kenwood TK-3230 User Manual
28
S
elcall
(S
elective
c
alling
)
A Selcall is a voice call to a particular station or group of
stations. Each transceiver is set up with an individual ID
number for use with selcalls.
n
M
aking
a
S
elcall
1
Press the CAL key.
2
Press the or key to select an ID number.
• “
” represents a single station, “
” represents a group of
stations, and “
” represents all stations.
3
Press the PTT switch to transmit the selected selcall ID.
• The transceiver waits for the Data Transmit Modulation
Delay time {page 29} before transmitting the selcall ID.
• The side tone sounds if PTT ID side tone {page 30} is
enabled.
4
Release the PTT switch to end transmission.
5
Press the CAL key to return to operating mode.
Note:
If Optional Signaling (menu “
”) has been set to “
”
(FleetSync), you can also set up an Individual Selcall Alert
type (menu “
”) and Group Selcall Alert type (menu “
”).
Individual and Group Selcall Alert types range from “
” (off)
and “
” (type 1) to “
” (type 10). Refer to the menu list on
page 46.