Kenwood TK-3230 User Manual

n

 The transceiver can send a PTT ID signal when pressing

the PTT switch (beginning of transmission) or when

pressing and releasing (beginning of transmission and end

of transmission) the PTT switch.
1

 With the transceiver power OFF, press and hold the

key while turning the transceiver power ON (for

1 second).

 Press the   or   key to select “   ”.

 Press the MENU key then press   or   to select

“

” (PTT ID is off), “

” (send your own PTT ID

at the beginning of transmission), or “

” to “

”

(send selected list ID number PTT ID at the beginning

and end of transmission).

 Press the MENU key to exit the selection.

 Press the PTT, MON, or CAL key to exit Setting Mode.

Transceiver's individual ID number is not available for

selection as PTT ID.

n

 When the PTT switch is pressed and/or released, a tone

will sound through your own speaker when the PTT ID is

transmitted.

 To turn the PTT ID Side Tone on or off: