Panasonic AG-HMR10P User Manual

75

The remaining battery capacity display is 

• 

a guideline and may change according to 
usage conditions.
The remaining battery capacity display will 

• 

momentarily disappear when switching 
between modes or changing the LCD 
brightness, because the capacity is 
recalculated at these times.
Not displayed when using the AC adapter.

• 

You can switch between displaying and 

• 

not displaying this information by selecting 
[CARD & BATTERY] → [ON] or [OFF] in the 
[DISPLAY SETUP] setup menu.

(In PB mode: Page 61)
Displayed when [REPEAT PLAY] → [ON] in the 
[PLAY SETUP] setup menu is selected.

(In REC mode)
REC:     

Recording

PAUSE (green):  Recording standby
PAUSE (red): 

Recording paused

Displayed when an error occurs in the input 

• 

signal during recording.
When the input signal returns to normal, the 

• 

recording restarts.
When the [REC/PAUSE] button is pressed, 

• 

the display changes to green.

CHK:  REC CHECK in progress

(In PB mode)

 :   Playback
 :   Playback paused

INDEX [   ]: Playback paused at index position

   (   ):   Frame-by-frame playback

(Frame-by-frame reverse 
playback)

 (

):  Next clip (Previous clip)

 (

):    Fast forward playback 

(Approximately 5 times the 
speed∗)(Rewind playback 
(Approximately 5 times the 
speed∗))

∗  Approximately 6 times normal speed when 

the [PB FORMAT] is set to 720/24P.

 (

):  Fast forward playback 

(Approximately 15 times the 
speed∗)
(Rewind playback (Approximately 
15 times the speed∗))

∗  Approximately 20 times normal speed when 

the [PB FORMAT] is set to 720/24P.

 ( ):      Paused in final scene (paused in 

initial scene)

SDI:   Displayed when in SDI mode.

The display flashes when recording cannot 

• 

be performed, such as when the input signal 
and recording format are different.

CAM:  Displayed when in CAM mode.

Flashes if the camera head has an 

• 

abnormality, such as a malfunction or broken 
cable.

INT:     Displayed when [INT SG] → [ON] in the 

[RECORDING SETUP] setup menu is 
selected. (Page 84)

You can switch between displaying and 

• 

not displaying this information by selecting 
[OTHER DISPLAY] → [ON] or [OFF] in the 
[DISPLAY SETUP] setup menu.

P-:  Displayed when PRE REC is set. 

(In CAM mode: Page 49)

A-:  Displayed when [AUTO REC] in the 

[RECORDING SETUP] setup menu is set to 
something other than [OFF]. (In SDI mode: 
Page 84)

(Page 68)/Microphone input adjustment 
level display (Page 47)
When the [AUDIO MON/ADV] button is 
pressed, the sound volume output from 
the built-in speaker and headphone jack is 
displayed.
During input audio level adjustment, “I.MIC” or 
“E.MIC” is displayed instead of “VOLUME”.

The range is displayed in accordance with the 
[SAFETY ZONE] (Page 88) setting in [DISPLAY 
SETUP].

When [4:3] is selected:

This displays the positions for 
4:3 cropping.

When [90%] is selected:

This indicates the range 
(90 %) that can be displayed by 
an ordinary home-use television.

When “EXPANDED” is displayed because 

• 

the focus assist function of CAM mode is 
being used, the safety zone is not displayed 
on the LCD monitor screen.

(For using focus assist, see page 46.)