Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. AG-HMR10P
  5. User Manual

Panasonic AG-HMR10P User Manual

Download
Page of 106
Displays
77
 
R
 
■
REC STOPPED.
NOW WRITING.
   Video recording has been stopped. Data is now 
being written onto the card.
 REPAIR CLIP?
  Do you want to repair clips now?
 REC WARNING
IRREGULAR FRM SIG.
•   Displayed when an abnormality is detected in the signal that 
is input to the portable recorder when recording SDI input. 
Recording resumes when the input signal returns to 
normal. “Resumption of recording” (warning display) 
can be canceled by pressing the [REC/PAUSE] button. 
S
 
■
 SD CARD FORMAT?
YES  NO
   Do you want to format the SD Memory Card now?
Yes/No
 SDI INPUT ERROR. 
(OTHER FORMAT)
•   Displayed when the format of the SDI input signal is 
different from the recording format of the portable recorder.
SET DATE AND TIME
  Set the clock.
T
 
■
THE CLIP IS PROTECTED. 
PLEASE CANCEL PROTECTION.
   The clip is protected. Cancel the protection.
 THE RECORDING IS STOPPED
(OVER THE LIMITATION)
   The recording will stop. (Continuous recording for 12 hours)
THE TC MODE IS CHANGED TO "NDF"
   NDF is selected as the TC mode setting. 
(Displayed when [SYSTEM FREQ] is set to [59.9Hz])
THIS BATTERY CANNOT BE USED.
   The battery currently inserted into the portable 
recorder cannot be used.
THIS CARD CANNOT RECORD IN VIDEO 
MODE.
  The card cannot be used for video recording.
THUMBNAIL DATA ERROR IS DETECTED.
   An error has been detected in the thumbnail information.
U
 
■
UNABLE TO FORMAT.
  The card cannot be formatted.
W
 
■
WRITE PROTECT
  The card is write-protected.
Error displays
The following messages are displayed when an 
error occurs in the portable recorder or the SD 
Memory Card. If the problem is not solved by 
switching the power off and back on again, either 
change the card in accordance with the instructions 
displayed, or consult the place of purchase.
C
 
■
CANNOT RECORD
   Displayed when an error has occurred during recording.
R
 
■
REC WARNING
   Displayed when an error has occurred during 
recording. Start the recording again. If the message 
appears again, consult the place of purchase.
 •  
Switch the power off if the message continues to appear.
Try inserting a different SD Memory Card if the 
message appears again after restarting recording.
S
 
■
SYSTEM ERROR
TURN POWER OFF
   Displayed when an error has occurred in the 
system. Switch the power off and back on again.
 •  
If this error is displayed when accessing the SD 
Memory Card, such as when deleting a clip, the 
SD Memory Card may be damaged. Replace it 
with a new SD Memory Card.
 •  
If this error is displayed when repairing the 
SD Memory Card, use the AVCCAM Restorer 
content repair software. (Page 34)
 •  
When the AG-HCK10G camera head is 
connected, displayed when the camera cable 
is removed with the power on. First turn off the 
power, then remove the camera cable. 
When the camera head is connected
 
■
   When the AG-HCK10G camera head (optional) is 
connected and recording is in progress, displayed when 
an abnormality is detected. Turn the power on again. 
 FOCUS NG
   TURN POWER OFF (error in focus operation)
 PSD NG 
   TURN POWER OFF (error in camera shaking detection) 
 ZOOM NG
  TURN POWER OFF (error in zoom motor)