Sennheiser EM 3731-II User Manual

Using the receiver

22

왘

Position the transmitter’s infra-red interface at a max. distance of 5 cm
in front of the infra-red interface (sync)

.

The transfer starts automatically. During the transfer, the two blue
LEDs in the infra-red interface (sync)

 flash and the backlighting of

the 

sync

button

 flashes green.

– After successful completion of the synchronization, the two blue

LEDs in the infra-red interface (sync)

 stop flashing and the

sync

button 

 is backlit in 

green

. The receiver’s frequency and name

are now also set on the transmitter and the transmission link is ready
for operation.

– If an error occurred during synchronization (e.g. the transmitter is

too far away from the receiver), the two blue LEDs in the infra-red
interface (sync)

 stop flashing and the 

sync

button

 is backlit in

red

.

Identifying receivers using the “Wireless Systems 
Manager” software (identifying function)

In multi-channel operation, it can be useful to identify the individual
channels of the receivers via the “Wireless Systems Manager” software.
The identifying function shows you which channel is assigned to which
receiver.

왘

Start the identifying function as described in the instruction manual of
the “Wireless Systems Manger” software.
“

Identified

” appears on the status display of the identified receiver:

After 60 seconds, the text disappears and the current status display is
shown again.

To change to the current status display before the end of the 60 seconds:

왘

Press the 

esc

button

5cm

<

μ

 

The infra-red interface of the SKM 5200-II hand-held transmitter is
located at the left-hand margin of the display. Position the
transmitter’s infra-red interface precisely in front of the receiver’s
infra-red interface (sync)

Identified

M

H

z

6.000

.01

BANK
CH

COM

AF

6