Graco 3A1214B User Manual
Operation
22
3A1214B
Start Engine
1.
Set POWER ON/OFF on Programmable Skipline
Controller to ON.
Controller to ON.
2.
Set engine to choke position ON.
3.
Set throttle to half speed and turn key.
4.
After engine starts, set choke to OFF.
Select/Prime Pumps
1.
Open hydraulic valve to activate pumps.
2.
Slowly turn pressure control clockwise until pump
begins to stroke.
begins to stroke.
3.
When flushing fluid comes out of return lines, set
hydraulic valve to OFF position.
hydraulic valve to OFF position.
4.
Place suction hoses in paint drums.
5.
Open hydraulic valve to activate pumps.
Gasoline is extremely flammable and explosive under
certain conditions. Fuel could spray from the fuel line
connector when it is disconnected from engine. Fuel
could come in contact with the hot muffler and cause
fire or explosion. To reduce the risk of fire or explosion,
always vent the fuel tank and allow engine muffler to
cool before you disconnect the fuel line.
certain conditions. Fuel could spray from the fuel line
connector when it is disconnected from engine. Fuel
could come in contact with the hot muffler and cause
fire or explosion. To reduce the risk of fire or explosion,
always vent the fuel tank and allow engine muffler to
cool before you disconnect the fuel line.
ti16920a
ti16922a
ti15838a
ti16645a
ti16920a