Renesas SH7264 User Manual
Section 20 Controller Area Network
Page 1062 of 2108
R01UH0134EJ0400 Rev. 4.00
Sep
24,
2014
SH7262 Group, SH7264 Group
CMAX
Specifies the maximum number of basic cycles when working as potential
time master
time master
TEW
Specify the width of Tx_Enable
TCMR0
Init_Watch_Trigger (compare match with Local Time)
TCMR1
Compare match with Cycle Time to monitor users-specified events
TCMR2
Watch_Trigger (compare match with Cycle Time). This can be programmed
to abort all pending transmissions
to abort all pending transmissions
TTW
Specifies the attribute of a time window used for transmission
TTTSEL
Specifies the next Mailbox waiting for transmission
Time Master/Time Slave
This module can be programmed to work as a potential time master of the network or as a time
slave. The following table shows the settings and the operation automatically performed by this
module in each mode.
This module can be programmed to work as a potential time master of the network or as a time
slave. The following table shows the settings and the operation automatically performed by this
module in each mode.