Yamaha HTR-6160 User Manual

■ Video settings

B)VIDEO SET

Use “VIDEO” of “INIT” in “ADVANCED SETUP” to set the 
parameters in “VIDEO SET” to the factory presets (see 
page 109).

VIDEO CONV.

Use this feature to set whether to convert the video signals 
input at the VIDEO, S VIDEO, and COMPONENT 
VIDEO jacks.

• This unit does not convert 480 line video signals and 576 line 

video signals interchangeably.

• The analog component video signals with 480i (NTSC)/576i 

(PAL) of resolution are converted into the S-video or composite 
video signals and output at the S VIDEO MONITOR OUT and 
VIDEO MONITOR OUT jacks.

• The converted video signals are only output at the MONITOR 

OUT jacks. When recording a video source, you must make the 
same type of video connections between each component.

• When composite video or S-video signals from a VCR are 

converted into component video signals, the picture quality may 
suffer depending on your VCR.

• Unconventional signals input at the composite video or S-video 

jacks cannot be converted or may be output abnormally. In such 
cases, set “VIDEO CONV.” to “OFF”.

■ Memory guard

C)MEMORY GUARD

Use this feature to prevent accidental changes to sound 
field program parameter and other system settings.

• You can change the following parameters even if “MEMORY 

GUARD” is set to “ON”:

– “EXTD SUR.” in “SOUND MENU” (see page 92)
– “DECODER MODE” in “INPUT MENU” (see page 94)
– “PARENTAL LOCK” in “INPUT MENU” (see page 94)
– “MEMORY GUARD”

• When “MEMORY GUARD” is set to “ON”, “ ” appears at the 

top right of the “SET MENU” screen.

• You can change the settings of “SUR.” in the sound field 

program parameter screen (see page 77) even if “MEMORY 
GUARD” is set to “ON”.

Converts composite, S-video, and component 
video signals interchangeably and up-converts 
composite, S-video, and component video 
signals to HDMI video signals.

OFF

Does not convert any signals.

[]/[]:
[

p]/[[]:

[

p

B)VIDEO SET

VIDEO CONV.;;;;;;ON

Up/Down

Select

.

Turns off the “MEMORY GUARD” feature.

ON

Protects:

– sound field program parameters
– “AUTO SETUP” items
– all speaker levels
– “MANUAL SETUP” items

[

p]/[[]:

[ENTER]:

C)MEMORY GUARD

>OFF

ON

Select

Return