Yamaha HTR-6160 User Manual

■ Zone 2 settings   

F)ZONE2 SET

MAX VOL.

Use this feature to set the maximum volume level in the 
Zone 2. 
Control range: –30.0 dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB

• The “MAX VOL.” setting takes priority over the “INI.VOL.” 

setting. For example, when “INI.VOL.” is set to –20.0 dB and 
then “MAX VOL.” is set to –30.0 dB, the volume level is 
automatically set to –30.0 dB when you turn on the power of 
this unit next time.

• The “MAX VOL.” setting does not affect the output level at the 

“ZONE 2 OUT” jacks.

INI.VOL.

Use this feature to set the volume level of Zone 2 when the 
power of this unit is turned on.
Choices: OFF, MUTE, –80.0 dB to +16.5 dB
Control step: 0.5 dB

• The “MAX VOL.” setting takes priority over the “INI.VOL.” 

setting.

• When you select “FRONT B”, “PRNS”, “Zone B”, or “NONE” 

in “EXTRA SP ASSIGN” (see page 85), “Zone 2 SP Not 
Assigned” appears in the OSD and the “ZONE2 SET” 
parameter is not available.

• The “INI.VOL.” setting does not affect the output level at the 

“ZONE 2 OUT” jacks.

[]/[]:
[

p]/[[]:

[

p

F)ZONE2 SET

MAX VOL.;;;+16.5dB

INIT. VOL.;;;;;OFF

Up/Down

Adjust

.