Yamaha HTR-6160 User Manual

You can create your original SCENE templates for each 
SCENE button. You can refer to the preset 18 SCENE 
templates to create the original SCENE templates.

Press and hold the desired 6

SCENE button 

for 3 seconds.
The SCENE template customizing screen appears on 
the video monitor.

When the SCENE template you want to customize is not 
assigned to any of the 6SCENE buttons, press 8l / h 
repeatedly to recall the desired SCENE template on the 
menu screen.

Press 8k / n to select the desired parameter 
of the SCENE template and then 8l / h to 
select the desired value of the selected 
parameter.
You can adjust the following parameters for a SCENE 
template:

• INPUT: The input source component.
• MODE: The active sound field programs, 

“Straight” or “Pure Direct” mode.

Press the 6

SCENE button again to confirm 

y
An asterisk mark (*) appears by the name of the original SCENE 
template.

• Once the desired SCENE templates are assigned to the 

corresponding 6SCENE buttons, you need to set the input 
source of the SCENE template on the remote control. See 
page 41 for details.

• You can create a customized SCENE template for each SCENE 

button, and if you create another customized SCENE template, 
this unit overwrites the old customized SCENE template with 
the new one.

• The newly created template is only available for the assigned 

SCENE button.

■ Rename the SCENE templates

Select the name of the SCENE template at step 3 
of “Creating your original SCENE templates” and 
then press 8

ENTER.

• Press 8k / n to select the desired character.
• Press 8l / h to place an “_” (underscore) under the 

space or the desired character.

• Press 9RETURN to cancel the new name.
• Press 8ENTER to confirm the new name.

[RETURN]:EXIT

[SCENE1]:SET

[ENTER]:Rename

MODE:STRAIGHT

INPUT: DVD

.pDVDViewing[

SCENE1

[

[RETURN]:CANCEL

[ENTER]:SET

[

p]/[[]:Position

[]/[]:Character

DVDViewing

RENAME

SCENE1

p

[

-